|Top Width:||17mm||Angle (°):||40°|
17mm Width Rubber Pulley,
mm Height Rubber Pulley,
mm Height rubber conveyor belt
High Strength Abrasion Resistant Rubber V Belt , Oil Resistant Rubber V Belt
The shuangli V-belt is manufactured by German technology. The inner core is made of tempered wire with a solid core and untwisted structure. It has zero elongation, flex resistance, high strength, good adhesion, and the service life is increased by 5-10 times, which effectively solves the problem of high Frequent replacement of ordinary V-belts in heavy-horsepower rotating systems.
Selection of matching triangle belt:
1. Before installing and installing correctly, install the V-belt, use the same method to install a set of V-belts.
2. The selected model should be compatible with the selected V-belt, otherwise the V-belt will be abnormal in the pulley groove. When changing to a V-belt, bring the old belt to the agricultural machinery department to buy it to prevent mistakes in the model.
3. To prevent the installation of belt pulleys in series grooves, the centers of the two upper pulleys must be aligned, otherwise it will cause the V-belt to work unilaterally, severely wear and reduce its service life.
|Type||Top width(mm)||Belt Thickness (mm)||Angle (°)||Production scope (lnch)|
|Can be customized according to customer requirements|
Triangle belt is also called V belt, also known as the cloth V belt
The triangle has two kinds of special core structure and rope core structure. The core, usually the band core, is twisted or woven with fiber. Special belt core is composed of polyester toughened brown silk, good adhesion, flexure resistance, high strength, no extension, its service life is 5-10 times of the rope core structure triangle belt.
3. Classification (by model)
Triangle belt by model can be divided into: usually V belt and narrow V belt
Usually v-shaped triangular belts are divided into seven grades: Y, Z, A, B, C, D and E
Narrow V bands are divided into usually narrow V bands and strong narrow V bands.
Usually narrow V with SPZ, SPA, SPB, SPC four models.
Strong narrow V with XPA, XPB, XPC
A combination of V bands, several of the same common V bands or narrow V bands working together. There's 3V, 5V, 8V and so on.
4. Model (usually model of triangular belt)
The section area of Type O, Type A, Type B, Type C, Type D and Type E tapes is gradually expanding.
When the top width and thickness are determined, the wheel groove of the belt pulley of the triangle belt can be confirmed. On the contrary, the wheel groove of the belt pulley can be confirmed and the type of the belt that should be used (A/B/C..) can be confirmed. .
Ld: Reference length. When the triangular belt rotates and bends around the pulley, the layer whose length and width remain unchanged is called the neutral layer. Under the specified tensioning force, the circumference measured along the neutral layer of the triangular belt is called Ld, the reference length
La: Outer circumference
Li: The inner circumference
Lw: Nodal length is the midline length of the triangle belt
Contact Person: admin