|Top Width:||16.3mm||Angle (°):||40°|
13mm height Rubber Drive Belts,
SPB type Rubber Drive Belts,
Teyma SPB type flat rubber drive belts
High Quality Transmission Classical V Belt Rubber V Belt Wrapped V-Belt
V belts are a type of belt than run in a pulley with a V-shaped grooved. Typically endless, V belts contain a trapezoidal cross section. Compared with flat belts, V belts transmit higher torque at lower levels of tension and width. V belts are one type of conveyor belting that fits various applications.
Advantages of triangle belt:
1. Simple structure, low requirements for manufacturing and installation accuracy, convenient use and maintenance, suitable for occasions with large two-axis central bureaus
2. Smooth transmission, low noise, buffering and absorbing vibration
3. When overloaded, the transmission belt will slip on the pulley, which can prevent the damage of weak parts and play a safety protection role
|Type||Top width(mm)||Belt Thickness (mm)||Angle (°)||Production scope (lnch)|
|Can be customized according to customer requirements|
Triangle belt is also called V belt, also known as the cloth V belt
The triangle has two kinds of special core structure and rope core structure. The core, usually the band core, is twisted or woven with fiber. Special belt core is composed of polyester toughened brown silk, good adhesion, flexure resistance, high strength, no extension, its service life is 5-10 times of the rope core structure triangle belt.
3. Classification (by model)
Triangle belt by model can be divided into: usually V belt and narrow V belt
Usually v-shaped triangular belts are divided into seven grades: Y, Z, A, B, C, D and E
Narrow V bands are divided into usually narrow V bands and strong narrow V bands.
Usually narrow V with SPZ, SPA, SPB, SPC four models.
Strong narrow V with XPA, XPB, XPC
A combination of V bands, several of the same common V bands or narrow V bands working together. There's 3V, 5V, 8V and so on.
4. Model (usually model of triangular belt)
The section area of Type O, Type A, Type B, Type C, Type D and Type E tapes is gradually expanding.
When the top width and thickness are determined, the wheel groove of the belt pulley of the triangle belt can be confirmed. On the contrary, the wheel groove of the belt pulley can be confirmed and the type of the belt that should be used (A/B/C..) can be confirmed. .
Ld: Reference length. When the triangular belt rotates and bends around the pulley, the layer whose length and width remain unchanged is called the neutral layer. Under the specified tensioning force, the circumference measured along the neutral layer of the triangular belt is called Ld, the reference length
La: Outer circumference
Li: The inner circumference
Lw: Nodal length is the midline length of the triangle belt
Contact Person: admin