|Top Width:||22mm||Angle (°):||40°|
18mm thickness Flat Rubber Drive Belts,
SPC Flat Rubber Drive Belts,
SPC transmission rubber belt
High Quality Transmission Classical V Belt Rubber V Belt Wrapped V-Belt
Do not mix the new and the old: When double or more than three triangle tapes need to be replaced, the specified type of triangle tape should be selected, and the tightness of each group of triangle tapes must be the same. It is not allowed to mix the new and the old or reduce the number of use. Otherwise, the old and new triangle tapes will be affected. Uneven force, even the old V-belt does not work, affecting power transmission and shortening life. Strictly prevent contamination During use, it is necessary to strictly prevent oil stains and muddy water, avoid contact with corrosive substances such as acids and alkalis, to prevent slipping and corrosion of the triangle belt and early damage.
|Type||Top width(mm)||Belt Thickness (mm)||Angle (°)||Production scope (lnch)|
|Can be customized according to customer requirements|
Triangle belt is also called V belt, also known as the cloth V belt
The triangle has two kinds of special core structure and rope core structure. The core, usually the band core, is twisted or woven with fiber. Special belt core is composed of polyester toughened brown silk, good adhesion, flexure resistance, high strength, no extension, its service life is 5-10 times of the rope core structure triangle belt.
3. Classification (by model)
Triangle belt by model can be divided into: usually V belt and narrow V belt
Usually v-shaped triangular belts are divided into seven grades: Y, Z, A, B, C, D and E
Narrow V bands are divided into usually narrow V bands and strong narrow V bands.
Usually narrow V with SPZ, SPA, SPB, SPC four models.
Strong narrow V with XPA, XPB, XPC
A combination of V bands, several of the same common V bands or narrow V bands working together. There's 3V, 5V, 8V and so on.
4. Model (usually model of triangular belt)
The section area of Type O, Type A, Type B, Type C, Type D and Type E tapes is gradually expanding.
When the top width and thickness are determined, the wheel groove of the belt pulley of the triangle belt can be confirmed. On the contrary, the wheel groove of the belt pulley can be confirmed and the type of the belt that should be used (A/B/C..) can be confirmed. .
Ld: Reference length. When the triangular belt rotates and bends around the pulley, the layer whose length and width remain unchanged is called the neutral layer. Under the specified tensioning force, the circumference measured along the neutral layer of the triangular belt is called Ld, the reference length
La: Outer circumference
Li: The inner circumference
Lw: Nodal length is the midline length of the triangle belt
Contact Person: admin