|Top Width:||13mm||Angle (°):||40°|
Type B Natural Rubber V Belt,
50In Rubber V Belt,
Abrasion Resistant Rubber Drive Belts
Industrial Use Rubber V Belt Using Natural Rubber
Rubber v belt used in household facilities, agricultural machinery, and heavy machinery. The ratio of top width to height is 1.6:1. The belt structure that uses cords and fiber bundles as tensile elements can transmit much less power than the equal width and narrow V-belts. Due to their high tensile strength and lateral rigidity, these belts are suitable for harsh working conditions with sudden changes in load. The belt speed is allowed to reach 30m/s, and the bending frequency can reach 40Hz.
The triangular belt is a rubber belt component used in mechanical equipment such as engines to transmit mechanical energy. Almost all mechanical equipment can not leave the transmission of the triangle belt. In order to protect the performance of the triangle belt, its manufacture is divided into many layers.
1. Rayon and rayon fabrics are soft to the touch, breathable and comfortable to wear, and brightly colored.
2. Man-made fiber fabric has good hygroscopic properties, and its hygroscopic properties are better in chemical fiber. But its wet strength is very low, it is about 50% of dry strength only, and fabric shrinkage rate is bigger, therefore should shrink in advance before cutting had better.
3, triangle belt manufacturers of ordinary viscose fabric with good drape, stiffness, resilience and wrinkle resistance of the characteristics of poor, so its poor garment shape, easy to produce wrinkle.
4. Viscose fiber fabric has good acid and alkali resistance, sunlight resistance and other drug resistance.
|Type||Top width(mm)||Belt Thickness (mm)||Angle (°)||Production scope (lnch)|
|Can be customized according to customer requirements|
Triangle belt is also called V belt, also known as the cloth V belt
The triangle has two kinds of special core structure and rope core structure. The core, usually the band core, is twisted or woven with fiber. Special belt core is composed of polyester toughened brown silk, good adhesion, flexure resistance, high strength, no extension, its service life is 5-10 times of the rope core structure triangle belt.
3. Classification (by model)
Triangle belt by model can be divided into: usually V belt and narrow V belt
Usually v-shaped triangular belts are divided into seven grades: Y, Z, A, B, C, D and E
Narrow V bands are divided into usually narrow V bands and strong narrow V bands.
Usually narrow V with SPZ, SPA, SPB, SPC four models.
Strong narrow V with XPA, XPB, XPC
A combination of V bands, several of the same common V bands or narrow V bands working together. There's 3V, 5V, 8V and so on.
4. Model (usually model of triangular belt)
The section area of Type O, Type A, Type B, Type C, Type D and Type E tapes is gradually expanding.
When the top width and thickness are determined, the wheel groove of the belt pulley of the triangle belt can be confirmed. On the contrary, the wheel groove of the belt pulley can be confirmed and the type of the belt that should be used (A/B/C..) can be confirmed. .
Ld: Reference length. When the triangular belt rotates and bends around the pulley, the layer whose length and width remain unchanged is called the neutral layer. Under the specified tensioning force, the circumference measured along the neutral layer of the triangular belt is called Ld, the reference length
La: Outer circumference
Li: The inner circumference
Lw: Nodal length is the midline length of the triangle belt
Contact Person: admin