Nature Rubber Triangle V Belt Diesel Engine Transmission

Nature Rubber Triangle V Belt Diesel Engine Transmission

Description: 

A. Accurate transmission, no sliding during work, with constant transmission ratio; B. Smooth transmission, with buffering and vibration reduction capabilities, and low noise; C. The transmission efficiency is high, up to 0.98, and the energy-saving effect is obvious; [Industrial Electrical Appliance Network-cnelc]>D. It is convenient to maintain, without lubrication, and low maintenance cost; E. Large speed ratio range, generally up to 10, linear speed up to 50m/s, with a large power transmission range, up to several watts to hundreds of kilowatts; F. It can be used for long-distance transmission, and the center distance can reach more than 10m. What are the precautions for installation and use of industrial rubber timing belts? Synchronous belts are strictly forbidden to bend during storage, otherwise the tensile layer will be broken. The minimum allowable bending diameter is shown in the table below. Synchronous belt type model allows the smallest bending diameter trapezoidal tooth synchronous belt MXL, T2.5 15 XL, T5 15 L, AT5, T10 20 AT10, H 40 XH, T20 70 XXH, 20M 100 Arc tooth synchronous belt S2M, S3M, 3MRPP2M ,RPP3M 15 S4.5M, S5M, 4M, RPP5M 25 S8M, 8M, RPP8M 40 S14M, 14MRPP14M 80 Do not store the timing belt in an abnormal bending state for a long time. 1. Please keep it in a cool place. 2. Please shorten the center distance or loosen the tension wheel during installation, and then reset. Do not forcibly load the timing belt from the sidewall of the wheel. 3. The side line of the synchronous belt must be perpendicular to the tooth surface of the wheel during installation. 4. The parallelism of the main shaft of the driving wheel and the driven wheel should be controlled at tangent tg = 1/1000. The axis position does not directly affect the service life. 5. If the belt runs sideways, adjust the parallelism of the two shafts or the axial position of the two wheels. And adjust the pressure of the tension wheel. 6. If the timing belt is found to be slack or has teeth skipping, immediately check whether the center distance is correct or loosely shifted. Otherwise, it should be adjusted or reinforced. 7. When the synchronous belt is installed, the tensioning force must be adjusted appropriately according to different specifications, models and bandwidth. 8. The tension wheel must be installed on the loose side of the synchronous belt drive.

Model:

Our product advantage:

1,  complete and numerous equipment make us have a strong production capacity ,which make delivery time short, guarantee timely delivery ;
2,  strict raw materials ,semi-finished products and finished products inspection system ensure the product quality.
3,  supplying for more than 80% domestic manufacturers for a long time. So the product quality and stability is recognised by the market;
4,  we have their own research and development team, make us design new products for you be possible.
5,  with the production increase year by year, the cost will be much lower.

Product Image:

About us:

Henan Shuangli Rubber Co., Ltd. is a scientific and technological company integrating research, development and production of triangle belts. It has more than 310 employees.The factory covers an area of 30,000 square meters and a building area of 15,000 square meters,and it’s only one Triangle belt manufacturer in north Henan. It won the honorary titles successively over the years,such as the National Export-oriented of Advanced Units and the Key Protection Enterprises in Henan Province,the Contract-abiding and Trust-worthy Enterprise, Credit Henan AAA Credit Enterprise. In 2017, it passed the certification of ISO9001, ISO14001, OHASA18001 International Quality System, environmental,occupational,healthy and safety certification.The company has 2 national patents currently. In 2015, it was rated as a famous trademark in Henan Province. In 2019, there was no blind spot in the coverage of cities and counties nationwide. At the same time, it was selected as one of the top ten brands of the national triangle belt.
The company’s products are sold by agents all over the country with the advantages of super high quality and complete specifications. The products are sold in Henan, Hebei, Shandong, Shanxi, Hunan, Hubei, Guangdong, Guangxi Jiangxi, Hainan, Ningxia, Heilongjiang, Jilin, Liaoning, Inner Mongolia, Xinjiang, Lhasa and all major provinces, cities and counties, and autonomous regions across the country, they are also exported to Laos, Myanmar, Pakistan, Kyrgyzstan and other countries, and have been trusted and praised by the majority of sellers and users.

Q&A:

Q1. What is your terms of packing?

A: Generally, we pack our goods in neutral white boxes and Woven bag. If you have legally registered patent,

we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages

before you pay the balance.

Q3. What is your terms of delivery?

A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?

A: Generally, it will take 10 to 20 days after receiving your advance payment. The specific delivery time depends

on the items and the quantity of your order.

Q5. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q7. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit ;

2. We respect every customer as our friend and we sincerely do business and make friends with them,no matter where they come from.