1850mm Length 3V V Belt,
High Wear Resistance 3V V Belt,
1850mm Length triple V belt
3V-1850 High Wear Resistance 3V V Belt , Industrial Banded V Belt
The belt core of the special belt core triangle belt adopts the whole solid rod-shaped belt core structure of polymer polyester tempered brown wire. Because the polyester tempered brown wire has an overall solid core and untwisted structure, it has good adhesion, flex resistance, high strength, and does not run long. It not only greatly increases the service life of the rubber transmission belt, but also has a balanced service life. It is maintenance-free and replaced regularly.
Before installation of the V-belt, if the center distance between the two shafts is adjustable, the center distance should be shortened first, and then the center distance should be adjusted as required after the tape is installed; if the center distance between the two shafts is not adjustable, one Put the V-belt into the groove of the wheel first, and then turn the other pulley to install the V-belt. Use the same method to install all the V-belts. It is forbidden to use tools to pry or pull the V-belt to prevent the V-belt from stretching or being too tight. The correct inspection method is to apply a vertical pressure of about 2 kilograms to the middle of each tape by hand, and adjust it in time if the sinking amount is not appropriate. When you need to replace the new and old triangle tapes with double or more than three triangle tapes, you must choose the triangle tape of the specified model, and require the tightness of each group of triangle tapes to be the same. It is not allowed to mix the new and the old or reduce the number of tapes. Uneven, even the old V-belt does not work, affecting power transmission and shortening the life of the V-belt.
-Cloth cover layer: Cotton/polyester blend
-Top rubber: NR,SBR
-Reinforcement body: Polyester cable cord
-Bottom rubber: NR,SBR
Consistent performance in multiple V-Belt drives - ensures all belts will measure within ARPM matching standards
Use pulleys made to ARPM standards
Oil & Heat Resistant: Durability in tough environments
|Type||Top width(mm)||Belt Thickness (mm)||Angle (°)||Production scope (lnch)|
|Can be customized by OEM|
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and Woven bag. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 10 to 20 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,no matter where they come from.
Contact Person: Ms. 张