40degree A Type V Belt,
1930mm length A Type V Belt,
1930mm length A Section V Belt Pulley
Banded Classical V-Belt A Section V Belt , Industrial Banded V Belt A-1930
Classic A section V-belts are exactly that, classic in design and application. The classic A v-belt is the most tried and true style of v-belt in the market. Originally designed to replace leather belts in a variety of industries including agriculture, facility maintenance, heating ventilation and air conditioning (HVAC), and lawn & garden. Also known as a light-duty v-belt, they are designed with a 40° angle to "wedge" the belt into the groove of the pulley. The greater the load, the greater the wedging action. The manufacturing process combines a rubber compound with a polyester cord to increase strength and stability.A section V-belts are conventional wrapped v-belts suitable for all standard industrial applications. Standard operating temperatures ranging from -1° F through 158° F. ISO:9001 Certified.
Triangle industrial belt Application Essentials:
1. Choose and buy: The triangle industrial belt selected according to the standard model should be suitable for the belt pulley groove, otherwise, the triangle belt will not work normally in the belt pulley groove. When changing with triangle tape, had better take old to agricultural machinery department to buy, in case the model is mistaken.
2. Installation: Before installation, if the center distance of the two axes is adjustable, the center distance should be shortened first, and then the center distance should be adjusted as required after the tape is installed; If the center distance between the two axes is not adjustable, one triangular industrial belt can be first put into the wheel groove of one wheel, and then the other pulley can be rotated to install the triangular belt. Apply the rest of the triangular tape in the same way. It is forbidden to use tools to pry or drag the triangle industrial belt hard during installation to avoid stretching or damaging the triangle belt.
3. Prevent cross-grooves: When installing the belt pulley, the center of the two belts must be aligned, otherwise it will cause the triangle industrial belt to work unilaterally and accelerate the wear, shortening the service life of the triangle industrial belt.
4. Suitable tightness: the triangle industrial belt is too loose and easy to slip, which will increase wear and even cause weak power transmission; Too tight will not only make. Triangle industrial belt stretched deformation, easy to damage, but also may cause the engine main bearing and clutch bearing too much force, and accelerate the triangle industrial belt wear. The way to check the tightness of the wheel belt is to apply a vertical pressure of about 2kg in the middle of each belt by hand. It is appropriate to apply a sinking amount of 20 ~ 30mm. It should be adjusted when it is not suitable.
|Type||Top width(mm)||Belt Thickness (mm)||Angle (°)||Production scope (lnch)|
|Can be customized according to customer requirements
1. Belt bolts can be used for multiple connections after triangle belt and conveyor belt are broken. Belt bolts are used to join belts together for fastening. Belt bolts are cheap and easy to make.
2. After the triangle belt and conveyor belt are broken, the belt splint can be used for multiple connections. Belt splint with large area connection, suitable for conveyer belt or large area loose belt. The belt splint connection area is wide, which can better recycle the service life of the belt.
3. After the triangular belt and the conveyor belt are broken, they can be widely connected with the belt buckle. Transportation belt buckle is divided into manual and electric. The manual type connects the broken belt to a special tool to make better use of the conveyor function of the belt. Machine type and special machine connection, imitate sewing function, confidentiality is good, not easy to break.
Contact Person: admin